Foil roll carbon 3D transparent 1,27x28m

ROLL FILM CARBON 3D TRANSPARENT 1.27X28M

NOTE! By purchasing this product you will receive one roll of 1.27x28m

Do you want to give the interior of your home a new and unique expression?

We have the answer to your needs.

Our thermoplastic film Self-adhesive CARBON 3D Transp arent veneer is a decorative product. It will allow you to give your objects freshness - awaken them to life! It will perfectly help to personalize your home and break out of the accepted patterns. Our veneer film is an ideal material for inexpensive masking of damage and other imperfections. Clear film with an interesting pattern will improve the look of any object!

CARBON 3D TRANSPARENT SEL F-ADHESIVE film will be perfect for giving your furniture and the interior of your home a unique character. The stylish finish will unify the texture and color of the surface, allow you to mask any imperfections, hiding scratches, scratches and discoloration. The veneered object will acquire a unique look, giving the environment an unparalleled atmosphere.

1.Properties of the film:

• self-adhesive - the film has a specialized channel adhesive, which facilitates sticking and minimizes the risk of air bubbles; the film is easy to install especially on flat, even surfaces

• easy to correct - you may be thinking, "What if I stick the film wrong?" Relax! Even within a dozen minutes after the first fixation you are able to get the full strength of the film. At the initial stage, the adhesive still weakly "binds", which will make it easier for you to correct your mistake

• trouble-free to remove - you can easily remove the film with warm air; it does not leave traces of glue

• flexible and thermoplastic - you can fit the film into a wide variety of shapes. You just need to use heat, which will increase its plasticity

• convenient for portioning - the film on its inner side has evenly spaced lines, which will make it easier for you to cut it to the right size

• resistant resistant to abrasion, detergents and even oil and grease

• easy to clean - just wipe with a damp cloth.

2 Installation instructions

Tools useful for film installation: surface degreaser, scissors, hair dryer and squeegee. (no items included)

NOTE! If you want to use a heat gun, remember to keep the proper distance. The same is true for a hair dryer. Too high a temperature can unglue the veneer.

1) Preparation of the film - the film on its inner side has evenly spaced lines. Based on these, cut the appropriate piece with scissors. NOTE: It would be worthwhile for you to take into account 2-3 cm each for wrapping the foil under the taped element.

2) Preparation of the surface - the area where the foil will be placed well degrease and wipe. It must be clean and dry.

3) Installation of the film - stick the film gradually peeling off the protective paper. For flat surfaces, press down using a squeegee. However, when you come across rounded shapes, unevenness heat the film using, for example, a hair dryer. The film will become malleable and, with a little patience and precision, will allow it to conform to the surface to be wrapped.

4) Elimination of bub bles - channel adhesive minimizes the risk of air bubbles. However, if they appear, smooth the film from the inside out - you can do this with a squeegee.

5) After installation, the film does not require heat fixation.

3) Use of the film

The film is primarily recommended for use inside. It can also be used outdoors.

The most common uses of the film:

• as wallpaper, to give walls an exotic look

• to refresh the appearance of the windowsill, closet, dresser and other furniture

• masking the resulting damage and other imperfections

Attention! There are places, objects to which it is not worth sticking the film:

• do not stick to moving parts - for example, door hinges - because the film may break off

• do not stick to places that heat up - for example, lamps, oven doors - because the film may burn

Foil type - SELF-ADHESIVE

Thickness:

Roll dimensions: 1.27x28m

Channel adhesive: yes

Thermoplastic: yes

Waterproof: yes

Application temperature - from -40°Cto +80°C

NOTE! When you buy this product, you will receive one roll of 1.27x28m.